翻訳と辞書
Words near each other
・ Polik, Garwolin County
・ Polik, Sierpc County
・ Polik, Łódź Voivodeship
・ Polikalepo Kolivai
・ Polikandy
・ Polikarp Mdivani
・ Polikarpov
・ Polikarpov DI-1
・ Polikarpov I-1
・ Polikarpov I-15
・ Polikarpov I-153
・ Polikarpov I-16
・ Polikarpov I-17
・ Polikarpov I-180
・ Polikarpov I-185
Polikarpov I-3
・ Polikarpov I-5
・ Polikarpov I-6
・ Polikarpov ITP
・ Polikarpov Ivanov
・ Polikarpov NB
・ Polikarpov P-2
・ Polikarpov Po-2
・ Polikarpov R-5
・ Polikarpov R-Z
・ Polikarpov SPB (D)
・ Polikarpov TB-2
・ Polikarpov TIS
・ Polikarpov VIT-1
・ Polikarpov VIT-2


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Polikarpov I-3 : ウィキペディア英語版
Polikarpov I-3

The Polikarpov I-3 ((ロシア語:Поликарпов И-3)) was a Soviet fighter designed during the late 1920s. It entered service in 1929, but was retired in 1935 with the advent of fighters with higher performance.
==Design and development==
Development of the I-3 began in mid-1926 after investigations into the loss of the Polikarpov DI-1 were completed. Although the new biplane shared many of the characteristics of the earlier design, including the staggered sesquiplane layout of the wings, it was a new design. It was designed by the OSS ((ロシア語:Otdel Sookhoputnykh Samolyotov) — Landplane Department) of ''Aviatrest'' (Aviation Trust) under the supervision of Nikolai Nikolaevich Polikarpov, head designer of the department. There was much debate within the OSS about the proper powerplant for the new fighter, but Polikarpov rejected the Wright Tornado radial engine and decided in favor of the BMW VI liquid-cooled V12 engine. A wooden mock-up was completed in April 1927, but formal approval of the design did not come until 3 June 1927. Static tests of a full-sized model began in October at the same time as negotiations for a license for the BMW engine were finished.〔Gordon and Dexter, p. 7〕
The I-3 had an oval-section semi-monocoque fuselage covered with 'shpon', molded birch plywood, with a small headrest faired into the fuselage, although the engine was enclosed in a metal cowling. The two-spar wings were covered in plywood and fabric and had a Clark Y profile. Internal bracing wires were fitted to reinforce the wings. The control surfaces were framed in duralumin, but covered in fabric. It was provided with differential Frise-type ailerons. The duralumin N-type struts that separated the wings, and attached the upper wing to the fuselage, had a teardrop profile. They were reinforced with steel bracing wires. The conventional undercarriage was fixed with rubber shock absorbers and the tailskid was made from duralumin. The main gear could be replaced by skis like those fitted to the Polikarpov R-1. The engine's semi-retractable radiator extended below the fuselage behind the rear main gear struts.〔Gunston, p. 292〕 Two fuel tanks were fitted, the main one in the fuselage, but a small tank, mainly used to start the engine, was in the center section of the upper wing, along with the engine coolant tank. A total of of fuel was carried. Initially the I-3 was fitted with two fixed synchronized Vickers machine guns, but these were later replaced by PV-1 machine guns. A central OP-1 optical gunsight was provided with a KP-5 ring sight offset to starboard. Some aircraft had bomb racks to carry two bombs.〔Gordon and Dexter, pp. 7–8〕
The first prototype was completed in early 1928 and made its first flight on 21 February. Its manufacturer's trials were finished by 10 March and the state acceptance trials by 14 April. The pilots of the NII VVS ((ロシア語:Naoochno-Issledovatel'skiy Institoot Voyenno-Vozdooshnykh Seel) – Air Force Scientific Test Institute) criticized the lack of directional stability at high speeds and a slight problem in control response between maneuvers. The area of the vertical tail was increased and the elevators were given horn balances to alleviate the first problem while split ailerons addressed the second problem. Since production had begun before the aircraft was actually approved for service use, the first forty aircraft were completed with the smaller tailplane. A second prototype was completed in August 1928 and tested a different propeller optimized for high speed which increased the top speed to , although it lengthened the take-off run. The first 39 aircraft completed, plus the two prototypes, used imported engines, but the remainder used the license-built Mikulin M-17.〔
Approximately 400 were built, with Gordon and Dexter citing sources that state 389 or 399. They also provide a yearly production table that lists 35 built in 1928, 47 in 1929, 250 in 1930 and 55 in 1931, which add up to 389 when the two prototypes are included.〔Gordon and Dexter, p. 9〕

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Polikarpov I-3」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.